Why Does Injection Molding Tooling Need To Try?

Most of the defects of plastic injection molding products are caused in the injection molding tooling and injection molding stages, but sometimes they are also related to unreasonable design. The influencing factors include: the type of injection port, the number of mold cavities, position and size, and cold/ The design of the hot runner system and the structure of the product itself. Therefore, in order to avoid product defects caused by mold design, plastic injection mold manufacturers need to analyze injection molding tooling during production.

After getting the test results of custom plastic injection molds, the operator usually needs to evaluate the specific conditions of the mold to avoid unnecessary cost and time during the modification process. In most cases, in order to make up for the shortcomings in the mold design, the operator may make incorrect settings without knowing it, because the parameter setting range required to produce qualified products is very small. Once there is any deviation in the parameter setting, it may Will cause the quality of the final product to far exceed the allowable error range

The purpose of injection molding tooling is to find out the optimized process parameters and mold design. Not just to get a good sample. this point is very important. Even if the materials, machine settings or environmental factors change, a stable and uninterrupted mass production environment can still be ensured.